A piston pin, also known as a wrist pin, is a hardened steel pin which connects an engine's piston to a connecting rod. The piston pin is hollow to reduce weight and is held in place with a number of different methods. Most factory-stock piston pin designs rely on a pressed fit with the piston pin being pressed into the connecting rod. High-performance pistons are typically held in place with wire clips or aluminum buttons. When installing a new piston pin it is imperative that the pin be oiled where it passes through the piston. Failure to adequately lubricate the piston pin will result in a seized piston nearly every time. The high heat generated by the connecting rod rotating within the piston causes a dry or inadequately lubricated pin to fall into the piston. This will cause the engine to lock up as the piston locks onto the piston pin. Broken connecting rods and even a broken engine block could also result.
While most stock piston pins are made of hardened steel, many high-performance applications utilize tool steel pins. These tool steel pins are the strongest and most durable available and can withstand ultra high horsepower.
The use of high-quality materials also allows the tool steel piston
pins to be made very light weight. This aids in the engine's ability to
accelerate at a much faster rate than an equally prepared engine
equipped with heavier piston pins.
While most pistons are sold complete with piston
pins included, some of the highest-quality racing pistons are sold
without pins. This allows the engine builder to purchase the piston pin
package which best suits the engine's build characteristics. Nearly
every professional engine builder around the world has a unique manner
of assembling engines; most will agree, however, that full-floating
piston pins are the correct call for a serious performance engine
In a stock engine, the piston pins are lubricated
and cooled by oil which is splashed or thrown off of the crankshaft as
it spins within the engine block. In most normal driving conditions,
this is a successful design. In racing or high-performance applications,
the engine builder will often incorporate a system of tubes directed
toward the bottom of the pistons. These tubes spray oil directly onto
the piston pins and the piston's pin bosses, maintaining lubrication and
cooling efforts. By keeping the piston pins cool, the pistons are able
to generate maximum horsepower without heat-related engine failure.